Sootblower Model PS-SL / PS-SB

Easy to Install
The sootblower mounts directly to
front and rear suspension points.
The suspension is designed to take
into account horizontal and vertical
expansion of the boiler wall.

Low Maintenance Design
The carriage travels along twin
guide rails driven by a robust rack
and pinion mechanism. Moving
parts are minimised. Easy
maintenance access is available to
all moving parts.

Minimised Spare Parts Stock
The PS series uses the same valve
as the Clyde Bergemann rotary
sootblowers, reducing overall parts
stock requirements.

Partial Retract Option
Where gas temperature permits,
this sootblower can also be
supplied in a partially retracting
configuration, reducing the exterior
projection of the sootblower from
the boiler.

Sectional Blowing Option
The sootblower may be specified to
blow over a limited blowing arc
where appropriate.

Choice of Wall Boxes
Positive pressure, negative
pressure and noise reduction
wallboxes are available to suit
installation conditions and
customer requirements.
Simple to Soundproof
Where sound emission
requirements are stringent, the
sootblower can be fitted with a
wallbox extension with sound
insulating rings to reduce sound
emissions from the nozzles.
Choice of Covers
Standard, extended and complete
enclosure covers are available to
suit installation conditions and
customer requirements.

Emergency manual operation
In the event of power failure the
sootblower can be operated
manually using the crank handle
provided.

Long Retractable Sootblower
Model PS-SL / PS-SB
Technical Data
Electric Motor
One 0.55 kW (0.37 kW for PS-SB) 3 phase flange mounted totally enclosed for
safe area environments. Explosion proof specification available for hazardous
areas.

Material Specifications
Lance tube material…………………...………………..chrome molybdenum steel
or special steels to suit boiler conditions
Feed tube material……………………………………... …………….stainless steel
Valve material…………………………………………...chrome molybdenum steel
class 300 or 600 to suit conditions
Flange
DN80 PN63 to standard DIN 2546. Other flange types available on request.